Filter
Top Products
4
Installation Instructions
PREPARING THE OPENING
MAINTAIN THE FOLLOWING
MINIMUM CLEARANCE
DIMENSIONS
1
3 3/4 MIN.
OVERALL COOKTOP
DIMENSIONS
2
CUTOUT DIMENSIONS OF
COUNTERTOP
To ensure accuracy, it is best to make
a template when cutting the opening
in the counter.
3
RECOMMENDED GAS SUPPLY
LOCATION FROM BACKWALL
4
MAKE SURE WALL
COVERINGS, COUNTERTOP
AND CABINETS AROUND
COOKTOP CAN WITHSTAND
HEAT (UP TO 200°F)
GENERATED BY COOKTOP
5
13″ MAX. Depth of unprotected
overhead cabinets
6″ MIN. clearance from
cutout to side wall on
the right of the unit
18″ MIN. height
from countertop
to nearest cabinet
on either side of
unit
3-3/4″ MIN. clearance
from cutout to side wall
on the left of the unit
Cooktop
19-5/8” width cut
14-1/4″
28-1/2”
length
of cut
2-1/4” Min. Between
cutout and the wall
behind the cooktop
28-1/4″
30″
21″ (21-1/2″ Max. for
Glass Top models)
3″
19-3/8″
2-1/2” Min. from
front edge of
cutout and front
edge of countertop
1” Min. From Backwall
13-1/4″
From
Cutout
Center Line
Recommended
gas supply
location
NOTE: All gas cooktop models require 7/16″
free area below cooktop height to
combustible material.
30″ MIN. clearance from
countertop to unprotected
overhead surface
Wall covering,
cabinets and
countertop
must withstand
heat up to
200°F