Garmin 205 Series GPS Receiver User Manual


  Open as PDF
of 8
 
nüvi 205 series quick start manual 3
Step 1: Mount Your nüvi
1. Plug the vehicle power cable into the back of your nüvi.
2. Snap the cradle onto the suction cup arm.
3. Clean and dry your windshield and the suction cup
with a lint-free cloth. Remove the clear plastic from the
suction cup. Place the suction cup on the windshield.
4. Flip the lever back toward the windshield.
5. Fit the bottom of your nüvi into the cradle.
6. Tilt your nüvi back until it snaps into place.
7. Plug the other end of the vehicle power cable into
a power outlet in your vehicle. Your unit should turn
on automatically if it is plugged in and the vehicle is
running.
8.IfyouareusingatrafcreceiverinEurope,connectthe
externalantennatothetrafcreceiverandsecureitto
thewindshieldusingthesuctioncups.(Trafcreceivers
are included in some nüvi 205 series packages.)
Step 2: Congure Your nüvi
To turn your nüvi on, slide the Power key to the left. Follow the on-screen
instructions. To turn your nüvi off, slide the Power key to the left.
Step 3: Acquire Satellites
1.Gooutdoorstoanopenarea,awayfromtallbuildingsandtrees.
2. Turn on your nüvi.
Suction cup mount
Cradle
Suction cup mount
Cradle
Vehicle power
cable
Vehicle power
cable
 previous next