Filter
Top Products
34 nüvi 5000 Owner’s Manual
Customizing the nüvi
Always—to automatically switch to
video mode.
Prompt
—to prompt you to switch
to video mode. When the prompt
appears, touch Yes to play your
video.
Ignore
—to ignore an external video
device connected to your nüvi. This
option requires you to select View
Video on the Video Input page to
view video input.
View Video—select to view video input
from an external source on your nüvi.
Restore
—restore the original video
input settings.
Changing the Proximity
Points Settings
You must have proximity points (such as
custom Points of Interest (POIs), a safety
camera database, or a TourGuide
®
)
loaded to adjust the proximity point
settings. See pages 39–40. Touch Tools
•
•
•
> Settings > Proximity Points.
Alerts
—touch to turn on or off the alerts
when you approach custom POIs or
safety cameras.
Audio
—touch to change the audio
notication when you approach a
proximity point on your route.
Viewing Trafc
Subscription Information
The FM TMC trafc receiver is an
optional accessory for the nüvi 5000.
With the trafc receiver connected,
touch Tools > Settings > Trafc.
NOTE: You can only access the trafc
settings if your nüvi is connected to
external power and an FM TMC trafc
receiver.
NOTE: If your trafc receiver has a
trial subscription, it does not need to
be activated and you do not need to
purchase a subscription until the trial
subscription expires.