Garmin nuvi 300/350 GPS Receiver User Manual


 
EN-3
E
N
Charging Your nüvi
Connect the nüvi to the mount, and start
your vehicle.
Connect the USB cable to the nüvi and
your computer.
Connect the AC adapter to a wall outlet
and the mini-USB connector on the side
of the nüvi. The AC adapter is included
with the nüvi 350 only.
Turning On the nüvi
Press and hold the Power button on the
top of the unit to turn it on. Follow the on-
screen instructions to set up your nüvi; you
only have to do this once. To turn your nüvi
off, press and hold the Power button.
Acquiring Satellites
Before the nüvi can nd your current
location and navigate a route, you must do
the following:
Go outdoors to an open area, away from
tall buildings and trees.
Flip up the GPS antenna on the back
of the nüvi, so that it is parallel to the
ground.
Turn on the nüvi.
Acquiring satellite signals can take a few
minutes. The bars indicate satellite
strength.
More Information
Download the English owner’s manual from
www.garmin.com/products/nuvi. Click the
Manuals link, and then click Download.
nüvi 350 users: You can access a PDF le
of the owner’s manual on the nüvi’s internal
memory. See page 7 for more information.
1.
2.
3.
WARNING: This product contains a lithium-ion battery. To prevent damage and risk of re due to high
temperatures, remove the unit from the vehicle or store it out of direct sunlight, such as in the glove box. For
more information, see www.garmin.com/safety.