![](http://pdfasset.owneriq.net/c/c3/cc36724c-db13-43f3-9e16-b78bdcb53b26/cc36724c-db13-43f3-9e16-b78bdcb53b26-bg3f.png)
2 - NAV PAGES
53
190-00357-00 Rev E
NAVCOM Page
To scroll through the list of frequencies:
1. Activate the cursor, if not already active, by
pressing the small right knob.
2. Turn the large right knob to move the cursor
through the list of frequencies. If there are more
frequencies in the list than can be displayed on
the screen, a scroll bar along the right-hand
side of the screen indicates the part of the list
that is currently being displayed.
The scroll bar along the right-hand side
of the page indicates the length of the
NAVCOM frequency list and what portion of
the list is currently being displayed.
3. To place a frequency in the standby field of the
COM or VLOC window, highlight the desired
frequency (using the large right knob) and
press ENT. Available in the GNS 530W only.
Some listed frequencies may include designations
for limited usage, as follows:
“TX”-transmitonly
“RX”-receiveonly
“PT” - part time frequency
If a listed frequency has sector or altitude restric-
tions, the frequency is preceded by an “Info?” designa-
tion.
To view usage restrictions for a frequency:
1. Turn the large right knob to place the cursor
on the “Info?” designation directly in front of
the desired frequency.
2. Press ENT to display the restriction informa-
tion.
Highlight “Info?” adjacent to the desired
frequency and press ENT to display usage
restrictions for the corresponding frequency.
3. To return to the NAVCOM Page, press ENT.