Garmin G3 GPS Receiver User Manual


 
Approach Owner’s Manual 9
Tips
To lock or unlock the screen,
press and quickly release
. Touch Lock Screen (or
Unlock Screen).
To stop playing at any time
during the round, touch the hole
number in the upper‑left corner >
Quit Round.
Clearing User Data
Notice
This deletes all user‑entered
information.
1. Turn off your Approach.
2. Pressyourngerontheupper-left
corner of the touch screen.
3. Whileholdingyourngeron
the touch screen, turn on the
Approach. Continue to hold your
ngeronthetouchscreenuntil
the message appears.
4. Touch Yes to clear all user data.
All original settings are restored.
Any items that you have saved are
erased.
Calibrating the
Touchscreen
The Approach screen does not
normally require calibration.
However, if the buttons do not seem
to be responding properly, use the
following process.
To calibrate the touchscreen:
1. While the unit is turned off, press
and hold for approximately 30
seconds.
2. Follow the instructions on the
screen until “Calibration is
complete” appears.