Filter
Top Products
14
Main Pages
Trip Computer
Trip Computer:
Four small data fi elds
Trip Computer Options
Using the Trip Computer
The Trip Computer stores information for your trip from the time it is reset until it is re-
set again. The Trip Computer displays information about your trip, such as your maximum
speed and trip odometer. You may change the trip computer data fi elds to suit your needs.
The trip computer displays information (trip data) in three full screens: the fi rst screen
displays four small data fi elds. As you scroll down you two medium sized data fi elds are
shown and fi nally one large data fi eld is displayed. The Foretrex remembers which Trip
Computer Page you previously viewed and displays that same screen when you view the
Trip Computer Page again. For example, if you were monitoring your speed using the one
large data fi eld format, when you return again to the view the trip computer, your speed is
displayed in the large data fi eld format.
Trip Computer Options
Press ENTER to display the following Trip Computer Page Options:
Change Fields: Press ENTER when this is highlighted to change the data fi elds that appear
on the right-hand side of the display. For a complete list and description of the data fi elds
available in the Foretrex, refer to “Data Field Options” found in the “Appendix”.
Reset Max Speed: Press ENTER when this is highlighted to reset the Maximum Speed
achieved during a trip.
Reset Trip Data: Press
ENTER when this is highlighted to reset the trip time, trip distance
(odometer), and average speed.
Restore Defaults: Press ENTER when this is highlighted to restore the Trip Computer data
fi elds to the defaults.
190-00360-00_0A.indd 14 3/29/2004, 11:32:42 AM