Filter
Top Products
5
Overview
Getting Started
Charging the Battery
The Foretrex 201 operates on a rechargeable lithium-ion battery. This battery lasts as
long as 15 hours when fully charged.
To charge the battery:
1. Wipe the contacts dry, if needed.
2. Snap the Cradle to the unit with the 4-contact end in first (shown in the top image to
the right).
3. Connect the AC Charging Cable in to the connector labeled “5.0V DC” (shown in the
lower image to the right) on the Charging Cradle.
4. Connect the AC Charging Cable to a power source.
Full recharge time should take between 2 and 3 hours. The battery must be charged at
least 2 hours before initial use.
NOTE: If the unit has been stored for a long period of time, it may require up
to 30 minutes of charging before it powers on and/or indicates charging. The
Foretrex 201 unit’s memory stores your data indefinitely. Battery life may be
decreased in extreme temperatures or as the battery ages.
Connecting the Foretrex 201 to your Computer
To connect your Foretrex 201 to your computer, place the unit in the cradle as described
above. Connect the PC Interface Cable to the Serial Connector on the Cradle. Connect the
other end of the PC Interface Cable to an available serial port on your computer.
Snapping the Foretrex 201 into the cradle
Serial Connector
5.0V DC Power Connector
Back of Cradle