Filter
Top Products
5
Step 3: Assemble and
Mount the Speech
Recognition Remote
Control
1. Insert the round lithium coin CR2032
battery into the remote control with the
positive side facing up.
2. Align the
arrow on the
battery cover
with the arrow
on the outer
edge of the
remote.
3. Use a coin to
twist the cover
clockwise until closed.
Mount the remote control in a convenient
location in your vehicle, such as on your
steering wheel. Use the strap to secure the
remote control in place.
Step 4: Congure the nüvi
To turn on your nüvi, slide the Power
key to the left and let go after one second.
Follow the on-screen instructions.
Step 5: Acquire Satellites
Go outdoors to an open area, out of garages,
and away from tall buildings. Stop your
vehicle, and turn on the nüvi. Acquiring
satellite signals may take a few minutes.
The bars indicate GPS satellite
strength. When one bar is green, the nüvi
has acquired satellite signals. Now you can
select a destination and navigate to it. For
more information about GPS, visit
www.garmin.com/aboutGPS.
Arrow on
battery cover
Battery cover
Arrow on
outer edge of
remote
Battery
Arrow on
battery cover
Battery cover
Arrow on
outer edge of
remote
Battery