Garmin 800 GPS Receiver User Manual


 
nüvi 800 Series Owner’s Manual 39
Using FM Trafc
Using FM Trafc
The trafc receiver is included in some
nüvi packages.
Use an FM TMC (Trafc Message
Channel) trafc receiver to receive
trafc information that is broadcast
over the FM Radio Data System. For
information about FM trafc receivers
and coverage areas, see www.garmin
.com/trafc.
NOTE: Garmin is not responsible for
the accuracy of the trafc information.
The FM trafc receiver receives
signals from the trafc service
provider and displays that information
on your nüvi.
NOTE: The FM trafc receiver and
the nüvi must be in data range of an
FM station transmitting TMC data to
receive trafc information.
To power connector
on nüvi cradle
To power outlet
in vehicle
Power
LED
Status
LED
NOTE: If your FM TMC trafc
receiver has an antenna with suction
cups on it, route the antenna on your
windshield vertically using the suction
cups.
LED Blink Codes
The green Power LED lights when
connected to external power. The Status
LED indicates the signal reception:
Yellow dot-dash ashes
determining which country you are
currently in.
Yellow solid—searching for signal.
Red solid—momentary sync loss.
Green solid—normal trafc data.