Filter
Top Products
GPSMAP 62 Series Quick Start Manual 9
: Sight ‘N Go is available only
with the GPSMAP 62s, GPSMAP 62st,
GPSMAP 62sc, and GPSMAP 62stc.
You can point the device at an object
in the distance, such as a bridge, lock
in the direction, and then navigate to
the object.
1. From the main menu, select
.
2. Point the device at an object.
3. Select >
.
4. Use the compass to navigate to the
object.
You can take photos with the GPSMAP
62sc and GPSMAP 62stc.
1. From the main menu, select
.
2. Turn the device horizontally or
vertically to change the orientation
of the photo.
3. If necessary, press orto
zoom in or out.
4. Hold the button to focus.
5. Release the button to take
a photo.
1. Place the loop of the wrist strap
through the slot opening at the
bottom of the device.
2. Route the strap through the loop,
and pull it tight.