Garmin 550 GPS Receiver User Manual


 
3: Attach the Base Plate to
the zūmo Mount
1. ThreadtheM4x40mmatheadbolts
and nuts to attach the base plate to the
zūmomount.
2. Tighten the nuts to secure the base plate.
4: Attach the Base Plate to
the Handlebar
Base
1. Align the ball of the
handlebar base and the
ball of the base plate with
the double-socket arm.
2. Tighten the knob slightly.
3. Adjust for better viewing
and operation.
4. Tighten the knob to
secure the mount.
5: Install the zūmo
in the Mount
1. Plug the power cable into
thezūmomount.Forabetter
seal, tighten the screws on
the power connector.
2. Fliptheleverup.
3. Fliptheweathercapdown
and under (magnetic).
4. Placethezūmointothe
mount,andipthelever
down.
5. Tighten the security screw.
About the Security
Screwdriver
Use the security screw to better
secure the zūmo to the mount.
You can connect the screwdriver to your key chain
for easy access.
Lever
zūmo mount
Power
cable
Security screw
More Information
For more information about the zūmo,
refer to the zūmo 500/550 Owner’s
Manual on disk.
See the Important Safety and Product
Information guide for product warnings
and legal information.
Security screwdriver
zūmo mount
Base plate
Weather cap
Knob
Double-socket arm
Handlebar base
zūmo mount
Base plate
Power socket
Mini-USB
port
Weather cap