Garmin 2515 GPS Receiver User Manual


 
60 nüvi 2405/2505 Series Owner’s Manual
NOTE: The required fuse for your cable
is listed after "output" on the back of the
vehicle power adapter.
4
Place the silver tip in the end piece.
5
Screw the end piece back into the vehicle
power cable.
Mounting on Your Dashboard
NOTICE
The permanent mounting adhesive is extremely
difcult to remove after it is installed.
Use the enclosed mounting disk to mount your
device to the dashboard and comply with certain
state regulations.
1
Clean and dry the dashboard where you are
placing the disk.
2
Remove the backing from the adhesive on
the bottom of the disk.
3
Place the disk on the dashboard.
4
Remove the clear plastic cover from the top
of the disk.
5
Place the suction cup mount on top of the
disk.
6
Flip the lever down (toward the disk).
Removing the Device, Cradle, and
Mount
Removing the Device from the Cradle
1
Press up on the tab on the top of the cradle.
2
Tilt the device forward.
Removing the Cradle from the Mount
1
Turn the cradle to the right or left.
2
Apply pressure until the socket on the cradle
releases the ball on the mount.