Filter
Top Products
11
INSTALLATION INSTRUCTIONS
GPSMAP 2206/2210 & GPS 17
Final Wiring Connection
After all the wiring is complete, plug the 18-pin harness into the center connector on the backside of the GPSMAP 2206/2210. The 5-pin port
on the right side is intended for future interfacing features and does not require connection at this time.
With power applied to the circuit, test the installation by pressing the
POWER key on the front of the unit. See the GPSMAP 2206/2210
Owner's Manual for steps on initializing the receiver.
18-pin connector
5-pin CANet connector