Filter
Top Products
2-7
Setting for communication software on PC
Baud Rate: 4800 bps
Character Length: 8 bit
Stop Bit: 1 bit
Parity: None
X Control: XON/XOFF
Downloading messages to a PC
Set up the computer to receive data. Messages are downloaded to a PC character by character
during reception.
To download all messages saved in NX-300, do the following;
1. Press the [MENU] key to open the main menu.
2. Press
!
or
"
to select FUNCTIONS.
3. Press the [ENT] key to show the FUNCTIONS menu.
4. Press
"
to select SAVE MESSAGE TO PC.
5. Press the [ENT] key. The following display appears.
Figure 2-17 SAVE MESSAGE TO PC display
6. Press the [ENT] key.
Figure 2-18 SAVING START window
7. Set up the computer to receive data.
8. Press
#
to select YES and press the [ENT] key.