Filter
Top Products
ANTENNA RADIATOR
1. Type Slotted waveguide array
2. Beamwidth
Radiator type XN12AF XN20AF XN24AF
Length 4 ft 6.5 ft 8 ft
Beamwidth (H) 1.8° 1.23° 0.95°
Beamwidth (V) 25° 20° 20°
3. Rotation Speed 24 or 42 rpm
4. Wind load 100 knots relative wind
RF TRANSCEIVER
1. Frequency 9410 ± 30 MHz (X-band)
2. Output Power FR-1505 MARK-3: 6 kW
FR-1510 MARK-3: 12 kW
FR-1525 MARK-3: 25 kW
3. Pulselengths and Pulse Repetition Rates (PRR)
Range scales (nm) P/L (µs) PRR (Hz)
0.125, 0.25 0.07 3000
0.5 0.07/0.15 3000
0.75, 1.5 2 from 0.07/0.15/0.3 3000/1500
3 2 from 0.15/0.3/0.5/0.7 3000/1500
6 2 from 0.3/0.5/0.7/1.2 1500/1000
12, 24 2 from 0.5/0.7/1.2 1000/600
48, 96 1.2 600
4. Mixer and Local Oscillator Microwave integrated circuit (MIC)
5. Duplexer Ferrite circulator with diode limiter
6. IF 60 MHz, Logarithmic, BW 28/3 MHz
7. Noise Figure 6 dB
DISPLAY UNIT
1. Picture Tube 15-inch diagonal color CRT
Pixels: 1024 x 768 dots
Effective diameter: 185 mm
Echo color: Yellow or green echoes in 16 levels
2. Presentation
Head-up, Course-up*, North-up*, Head-up true bearing*,
True motion**
*Heading data required.
**Heading and speed data required.
3. Range Scales and Range Ring Intervals (nm)
Range: 0.125, 0.25, 0.5, 0.75, 1.5, 3, 6, 12, 24, 48, 96
Rings: 0.025, 0.05, 0.1, 0.25, 0.25, 0.5, 1, 2, 4, 8, 16
4. Minimum Range and discrimination
35 m
5. Accuracy
Range: 1% of range in use or 10 m, whichever is greater
Bearing: Better than 1°
6. Echo Trails
True or relative echo trails in monotone or multilevel shading (Speed
and heading data required for true echo trails)
Trail length: 15, 30 s, 1, 3, 6, 15, 30 min, or continuous
7. EPA (Electronic Plotting Aid)
Manual plotting of up to 10 targets with auto follow-up, true/rel
vectors with a specified vector length (30 s, 1, 3, 6, 15 or 30 min)
and target data readout (Speed and heading data required for true
vectors.)
8. Interface
Channel 1 Input: BWC, BWR, DBK, DBS, DBT, DPT, GGA, GLL,
HDG, HDM, MDA, MTW (*), RMA, RMB, RMC,
VBW, VTG, ZDA
Output: RSD (every 4 s),
TTL (When A/C RAIN control is pressed.)
Channel 2 Input: DBK, DBS, DPT, MDA, MTW, VBW
Output: TTM
Channel 3 Input: HDB, HDM, HDT, VHW
Output: None
9. Other Features
Automatic tuning, A/C sea/rain, Interference rejection, Second trace
echo suppression, Echo stretch, Heading line off (self-returning),
Two VRMs, Two EBLs with true/rel bearing readout*, EBL/VRM
offset, Instant day/night brilliance setting, Trackball cursor with range
and true/rel bearing* plus L/L** readouts, Parallel index lines, Off-
centering (up to 75% of range scale), Quick restart in case of
accidental power-off, Nav data display**, User-definable function
key
*Heading data required for true bearing readout.
**Nav data inputs required.
ENVIRONMENTAL CONDITIONS
(Meets IEC 60945)
Temperature: -25°C to +70°C (Antenna unit)
-15°C to +55°C (Display unit)
POWER SUPPLY
12/24/32 VDC, 295 W max,or 115/230 VAC, 50/60 Hz, 1ø, 465 VA max.
440 VAC, 50/60 Hz with stepdown transformer RU-1803
(12 VDC for FR-1505/1510 MARK-3 only)
EQUIPMENT LIST
Standard
1. Display Unit RDP-119 with sun visor (DC or AC) 1 unit
2. Antenna Unit 1 unit
Scanner: RSB-0074 (24 rpm) or RSB-0075 (42 rpm)
Transceiver: RTR-067 (6 kW), RTR-062 (12 kW) or RTR-063 (25 kW)
3. Antenna Cable 15, 20, 30 m (specify) 1 pc.
4. Standard spare parts and installation materials 1 set
(Specify model number, power supply, antenna type and rpm, and length
of antenna cable when ordering.)
Optional
1. Power Cable CVV-S8x2C 15 m (for DC set)
2. Stepdown transformer RU-1803 (for 440 VAC, 50/60 Hz, 1ø mains)
3. External Alarm Buzzer OP03-21
4. Gyro Interface GC-8 (built-in type)
5. Gyro Converter AD-100
6. Video Plotter RP-17 (built-in type)
7. Auto Plotter ARP-17 (ATA)
For 24 rpm scanner only.
8. Performance Monitor PM-30
9. Handgrips
10.Interface Kit for connection of XGA monitor OP03-153
SPECIFICATIONS OF FR-1505/1510/1525 MARK-3
9910XXN Printed in Japan
FURUNO U.S.A., INC.
Camas, Washington, U.S.A.
Phone: +1 360-834-9300 Telefax: +1 360-834-9400
FURUNO (UK) LIMITED
Denmead, Hampshire, U.K.
Phone: +44 2392-230303 Telefax: +44 2392-230101
FURUNO FRANCE S.A.
Bordeaux-Mérignac, France
Phone: +33 05 56 13 48 00 Telefax: +33 05 56 13 48 01
FURUNO ESPAÑA S.A.
Madrid, Spain
Phone: +34 91-725-90-88 Telefax: +34 91-725-98-97
FURUNO DANMARK AS
Hvidovre, Denmark
Phone: +45 36 77 45 00 Telefax: +45 36 77 45 01
FURUNO NORGE A/S
Ålesund, Norway
Phone: +47 70 102950 Telefax: +47 70 127021
FURUNO SVERIGE AB
Västra Frölunda, Sweden
Phone: +46 31-7098940 Telefax: +46 31-497093
FURUNO SUOMI OY
Helsinki, Finland
Phone: +358 9 317277 Telefax: +358 9 3412930
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
470 18.5"
4-˘15
300 11.8"
(240 9.5")
XN20AF: 2060 81.1"
XN12AF: 1250 49.2"
XN24AF: 2570 101.2"
570 22.4"
DISPLAY UNIT
ANTENNA UNIT
2C 1.5 m
250V-DPYCY-1.25
SDME
CO-SPEVV-SB-C
Gyro
Compass
250V-MPYCY-5
Performance Monitor
PM-30 (option)
CO-SPEVV-SB-C
EPFS
ANTENNA UNIT
Gyro Interface
* 24 rpm, 12/24/32 VDC or 115/230 VAC
(for FR-1505/1510 MARK-3)
Auto Plotter
ARP-17
Video Plotter
RP-17
DISPLAY UNIT
External Buzzer
Gyro
Converter
Optional Supply
* Specify when ordering
24 rpm, 24/32 VDC or 115/230 VAC
(for FR-1525 MARK-3)
* 42 rpm, 24/32 VDC or 115/230 VAC
(for FR-1505/1510/1525 MARK-3)
Stepdown
Transformer
RU-1803
440 VAC
INTERCONNECTION DIAGRAM
200 7.9"
51 2.0"
465 18.3"
355 14.0"
412 16.2"
4-˘12
422 16.6"
487 19.2"
134 5.3" 200 7.9"
611 24.1"
29 kg, 64 lb
RSB-0074/RTR-067/XN12AF:
31 kg 68 lb
RSB-0074/RTR-062/XN20AF:
37 kg 82 lb
RSB-0074/RTR-063/XN24AF:
40 kg 88 lb