Ford P5064 Motorized Toy Car User Manual


  Open as PDF
of 28
 
11
P5064pr-0922
ASSEMBLY
7
8
•Fita
3
/8"-16hexnutontotheendoftherearwheelassembly.
•Tightenthehexnutsonboth sides of the rear wheel assembly
with the wrench.
Hint: An extra wrench has been provided to hold the hex nut
on one side of the rear axle while tightening the hex nut on
the other side.
3
/8" -16 Hex Nut
Wrench
Rear Wheel Assembly
•Fitandsnapahubcapcovertoeachhubcap.
Hubcap Cover
Hubcap Cover
9
•Slidea
7
/
16
" washer onto a front axle.
•Slideabushing,ring side first,ontoafrontaxle.
7
/
16
" Washer
Front Axle
Bushing
(Ring Side First)
•Turnthevehiclesothatthefrontendistowardyou.
•Fitthesteeringlinkageassemblytothefrontendofthevehicle.
•Inserttwo#12x1
1
/
4
" screws into the holes in the steering
linkage assembly. Tighten the screws.
•Pullthesteeringlinkagetobesureitissecure.Ifitisnotsecure,
tighten the screws a few more turns.
Steering Linkage
Assembly
Ring Side
First
10
 previous next