Filter
Top Products
Oil Change Service Interval* 11 12 13 14 15
Change engine oil and filter •••••
Rotate tires, inspect tire wear and measure tread depth •••••
Inspect the wheels and related components for abnormal noise, wear,
looseness or drag
•••••
Perform multi-point inspection (recommended) •••••
Inspect automatic transmission fluid level (if equipped with a
dipstick); consult dealer for requirements
•••••
Inspect brake pads, shoes, rotors, drums, brake linings, hoses and
parking brake
•••••
Inspect engine cooling system for strength, and hoses •••••
Inspect exhaust system and heat shields •••••
Inspect half-shaft boots (if equipped) •••••
Inspect and lubricate steering linkage, ball joints, suspension, tie-rod
ends, driveshaft and U-joints if equipped with grease fittings
•••••
Inspect cabin air filter (if equipped) •••
*Oil change service intervals should be completed as indicated by the instrument cluster message center
Reset your Intelligent Oil Life Monitor™ after each engine oil and filter change; refer to the Instrument Cluster chapter
Scheduled Maintenance Guide
387
2011 Taurus (500)
Owners Guide, 1st Printing
USA (fus)