Filter
Top Products
Examples of acceptable condensation are:
• Presence of thin mist (no streaks, drip marks or droplets)
• Fine mist covers less than 50% of the lens
Examples of unacceptable moisture (usually caused by a lamp water
leak) are:
• Water puddle inside the lamp
• Large water droplets, drip marks or streaks present on the interior of
the lens
Take your vehicle to a dealer for service if any of the above conditions of
unacceptable moisture are present.
Using the right bulbs
Replacement bulbs are specified in the chart below. Headlamp bulbs
must be marked with an authorized “D.O.T.” for North America and an
“E” for Europe to ensure lamp performance, light brightness and pattern
and safe visibility. The correct bulbs will not damage the lamp assembly
or void the lamp assembly warranty and will provide quality bulb burn
time.
Function Number of bulbs
Trade
number
Front park/turn lamp 2 3157NA
*Front sidemarker lamp N/A LED
Headlamp
2 9008 H13
2
D3 HID
(optional)
Tail/brake/turn signal lamp
2 3157K
N/A
*LED
(optional)
Supplemental taillamp 2 194
Rear sidemarker
2 194
N/A
*LED
(optional)
Backup lamp 2 921
License plate lamp 2 C5WL
*High-mount brake lamp N/A LED
Lights
87
2011 Flex (471)
Owners Guide, 1st Printing
USA (fus)