Filter
Top Products
Switch
position 12345678 9101112
Up, on
or +
LLLLLLLL L L L L
Middle,
neutral
or 0
MMMMMMMMMMMM
Down,
offor–
RRRRRRRR R R R R
L=left; M=middle; R=right
3. To input these positions into the
Car2U system, simultaneously
press all three Car2U system
buttons for a few seconds and then
release to put the device into
programming mode. The indicator
lights will blink slowly. Within
2.5 minutes enter your
corresponding DIP switch settings
from left to right into your Car2U system by pressing and releasing the
buttons corresponding to the settings you circled.
4. After inputting switch settings, simultaneously press and release all
three Car2U system buttons. The indicator lights will turn on.
Driver Controls
88
2011 Escape Hybrid (ehv)
Owners Guide, 1st Printing
USA (fus)