Filter
Top Products
Item Capacity Ford part name
Ford part number /
Ford specification
Fuel tank–all regular and
extended length vans and
wagons
35.0 gallons
(132.4L)
——
Fuel tank–138 inch wheelbase
(except E-Super Duty)
40.0 gallons
(151.0L)
Fuel tank–158 inch wheelbase
(except E-Super Duty)
40.0 gallons
(151.0L)
8
Fuel tank–176 inch wheelbase
(except E-Super Duty)
40.0 gallons
(151.0L)
8
Fuel tank–158 inch and
176 inch wheelbase (E-Super
Duty)
55.0 gallons
(208.0L)
1
Add the coolant type originally equipped in your vehicle.
2
Use of synthetic or synthetic blend motor oil is not mandatory. Engine oil need only meet the requirements of Ford
specification WSS-M2C930-A and the API Certification mark.
3
Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size, if equipped with an in-tank
cooler, if equipped with an oil to air cooler and if equipped with a remote filter assembly. The amount of transmission fluid and
fluid level should be set by the indication on the dipstick’s normal operating range.
4
Automatic transmissions that require MERCON LV should only use MERCON LV fluid. Refer to scheduled maintenance
information to determine the correct service interval. Use of any fluid other than the recommended fluid may cause
transmission damage.
5
Dana limited-slip axle (M60) requires 8 oz. (228 ml) of Additive Friction Modifier XL-3 or equivalent meeting Ford
specification EST-M2C118-A.
6
If your vehicle’s rear axle is filled with a synthetic rear axle lubricant it is considered lubricated for life. These lubricants do
not need to be checked or changed unless a leak is suspected, service is required or the axle assembly has been submerged in
water. The axle lubricant should be changed any time the rear axle has been submerged in water.
7
Fill Dana rear axles to 1/4 inch to 9/16 inch (6 mm to 14 mm) below bottom of fill hole.
8
Optional fuel tank 55.0 gallons (208.0L).
Maintenance and Specifications
309
2010 Econoline (eco)
Owners Guide, 1st Printing
USA (fus)