Filter
Top Products
4. Press and hold the brake pedal
for two seconds, then release.
5. Turn the ignition to off - DO
NOT remove the key.
6. Cycle the ignition from off to on three times ending in on - DO NOT
start the engine.
If the reset mode has been entered successfully, the horn will sound
once, and the TPMS indicator
will flash.
If after repeated attempts to enter the reset mode, the horn does not
sound, and the TPMS indicator
does not flash, seek service from
your authorized dealer.
7. Train the TPMS sensors in the tires using the following TPMS reset
sequence starting with the left front tire in the following clockwise
order:
1. Left front tire (Front driver’s side)
2. Right front tire (Front passenger’s side)
3. Right rear tire (Rear passenger’s side)
4. Left rear tire (Rear driver’s side)
Crown Victoria Severe Duty
277
2011 Crown Victoria (cro)
Owners Guide, 1st Printing
USA (fus)