Ford 2007 Escape Automobile User Manual


 
guide the jack bottom first in the
trim opening and position in the
bracket (3),
secure the retention clip on the
upper part of the jack (2), and
close the thumbscrew (1).
Make sure the jack is fastened so it
does not rattle when you drive.
Non-cargo management system
(if equipped):
Reclip the tools onto the jack
making sure that the tools are
fully contained by the clips as
shown.
Reinstall the jack in the pocket
with the left side first, then snap
the right side down.
Ensure that the hold-strap
contains the jack and tools before snapping the buckle.
Ensure that the jack and tools are oriented as illustrated.
Stowing the flat/spare tire
Note: Failure to follow spare tire stowage instructions may result in
failure of cable or loss of spare tire.
If you are stowing a tire that requires reattaching it to the
vehicle with a tether, perform these steps first, then proceed with
the steps following.
2007 Escape (204)
Owners Guide (post-2002-fmt)
USA (fus)
Roadside Emergencies
216