Ford 2000 Ranger Automobile User Manual


 
ENGINE OIL
Checking the engine oil
Refer to the Scheduled Maintenance Guide for the appropriate intervals
for checking the engine oil.
1. Make sure the vehicle is on level ground.
2. Turn the engine off and wait a few minutes for the oil to drain into the
oil pan.
3. Set the parking brake and ensure the gearshift is securely latched in P
(Park) (automatic transmissions) or 1 (First) (manual transmissions).
4. Open the hood. Protect yourself from engine heat.
5. Locate and carefully remove the
engine oil level indicator (dipstick).
6. Wipe the indicator clean. Insert the indicator fully, then remove it
again.
If the oil level is between the ADD and FULL marks or between
the MIN and MAX marks (depending on application), the oil
level is acceptable. DO NOT ADD OIL.
MAXMIN
FULLADD 1QT
Maintenance and care
163