Turn the fan speed control knob to
the desired speed.
Turn the temperature control to the
desired temperature.
If the front seat control panel is set
to MAX A/C, only cool air will be
provided because no heating is
available in this mode. You can get
warm or cool air through either the overhead registers or floor vent by
turning the auxiliary mode selector:
• Far left for airflow to the overhead registers.
• Far right for airflow to the rear floor vent.
• Anywhere between PANEL and
FLOOR to vary airflow between
the outlets.
REAR WINDOW DEFROSTER
The rear defroster control is located
on the instrument panel.
Press the rear defroster control to
clear the rear window of thin ice
and fog.
• A small LED will illuminate when
the rear defroster is activated.
The ignition must be in the ON position to operate the rear window
defroster.
The defroster turns off automatically after 10 minutes or when the
ignition is turned to the OFF position. To manually turn off the defroster
before 10 minutes have passed, push the control again.
LO
OFF
HI
WARMCOOL
FLOORPANEL
Controls and features
26