Ford 1999 Contour Automobile User Manual


 
Controls and features
71
Spare key programming
A maximum of 8 keys in all can be
coded with any two coded keys.
Insert the first key in the
ignition switch and turn to position
3.
Turn the key back to position 1
and remove from the ignition
switch within 5 seconds.
Insert the second key in the
ignition switch and turn to position
3 within 5 seconds.
Turn the key back to position 1
and remove from the ignition
switch within 5 seconds - the key
coding mode is now activated.
If an uncoded key is now
inserted in the ignition switch and
turned to position 3 within 10
seconds, this key is coded to the
system.
If coding is not completed
correctly, the control light flashes
after the ignition is switched on
with the newly coded key. Repeat
the coding process after waiting 20
seconds with the ignition in
position 3.
If keys become lost, you must have
your dealer clear and reprogram
the code for security reasons.
3
4
2
1
13CCfen 3/25/99 1:51 PM Page 71