Filter
Top Products
Your personal code does not replace the permanent
code that the dealership gave you. You can use
either code to unlock your vehicle. If a second
personal code is entered, the module will erase the
first personal code in favor of the new code.
If you wish to erase your personal code, use the
following instructions:
Erasing personal code
1. Enter the factory-set code.
2. Press 1/2 within five
seconds of step 1.
3. Press the 7/8 and 9/0
controls at the same
time within five
seconds of step two.
The system will now only respond to the factory-set
code.
Unlocking the doors and releasing the trunk
with the keyless entry system
The driver’s door must be unlocked before any
other. If more than five seconds pass between
pressing numbers, enter the code again. The system
has shut down if the keypad light is out. If the
keyless entry system does not work, use the key or
remote entry transmitter(s).
1. To unlock the driver’s door, enter one of the two
codes. After pressing the fifth number, the driver’s
door unlocks.
2. To unlock the
passenger’s door(s) and
liftgate (wagon), press
the 3/4 control within
five seconds of
unlocking the driver’s
door.
1 2
3
45678
9
0
1 2
3
45678
9
0
Controls and features
51