Filter
Top Products
Size Adjustment Buttons
Fisher Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
©2010 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
PRINTED IN CHINA V4599a-0920
Size
Adjustment
Buttons
• Make sure your child is seated.
• Place your child's foot in the skate.
• Squeeze the size adjustment buttons together, while
pushing the front of the skate to the appropriate size
for your child.
• Repeat this procedure to adjust the size of the other
skate to your child's other foot.
Care
• Periodically lubricate the rear axle on each skate with
a little petroleum jelly.
• Check plastic parts on a regular basis and discard
if broken or cracked.
Consumer Information
1
2
3
Fitting the 1-2-3 Roller Skates
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; www.service.mattel.com.
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
www.service.mattel.com/uk
Mattel Europa, B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.
• Insert the skate fastener strap into the slot on the
side of the skate.
• Pull the fastener strap tight and fold it back on itself
to secure.
Helmet Information
Your child must always wear a bicycle helmet when
using this product. Helmets reduce the energy of some
impacts, minimizing or preventing head injuries. Make
sure your child’s helmet has a label stating/certifying
conformance with the applicable certifying agency and
includes the intended age requirement for use with
a child. In addition, children ages 1 to 5 years require
helmets specifically designed and labeled for younger
children. These helmets cover a larger portion of the
head and provide more protective coverage than other
helmets for older persons.
For maximum protection during an impact, the helmet
must be properly secured to your child’s head. The
helmet must have a strap that goes under the chin
with a buckle that stays securely fastened. The helmet
should be worn level/low on the forehead, not tilted
back. The chinstrap should be adjusted so there is no
slack and it is firmly buckled (see helmet instructions).
After securing the helmet to your child’s head, test to
be sure that the strap stays tight, the buckle remains
secure and the helmet cannot be removed from your
child’s head by twisting or pulling the helmet. Remind
your child to remove the helmet when playing on any
kind of playground equipment or any place where the
helmet may present a risk of strangulation.
If the helmet is involved in a crash, replace it or have it
examined by the manufacturer before reuse.
• Turn the skate upside down.
• Squeeze the size adjustment buttons together,
while pulling the front of the skate to the fully
extended position.
• Repeat this procedure to open the other skate to the
fully extended position.
Fastener Strap
Slot