Filter
Top Products
ASSEMBLY
P6827pr-0920
12
• Insert four #8 x
3
/4" screws into the dash assembly and tighten.
• Fit the dash assembly onto the posts near the front end of
the vehicle.
11
• Position the motor harness connector toward the front of
the vehicle.
• Place the dash assembly upside down on top of the front end
of the vehicle.
• Plug the dash connector from the vehicle into the dash
connector on the dash assembly.
Hint: If the connectors do not fit together, do not force them.
Simply turn one of them around and try again.
10
Dash Assembly
Motor Harness Connector
Dash
Connectors
13
• Insert two black #8 x
3
/4" screws into the dash assembly
as shown and tighten.
Posts
PostsPosts
BACK VIEW
11