Filter
Top Products
M9779b-0920
12
• Fit the loops on grille support through the slots in the grille.
Push to "snap" the loops in place.
15
• Insert a screw through the large opening in the steering
column cap and the hole in the steering column. Tighten
the screw.
Grille Support
Loop
• Fit the pegs on the underside of the grille support into the
receptacles on the vehicle.
• Insert two screws into the grille support and tighten.
16
• Slide a rear wheel onto the rear axle.
Hint: Note the number on the inside of the wheel and on the
bottom of the vehicle near the rear axle. The rear wheel with a
1 should match the 1 on the vehicle and the rear wheel with a 2
should match the 2 on the vehicle.
17
Screw
LoopSlots
Screws
Rear Wheel
Rear Axle
2
14