Filter
Top Products
17
ASSEMBLY
M3865pr-0920
24
26
• Fit a
5
/16" large washer onto each front axle.
Large
Washer
Front Axle
• Identify the inside and the outside of a wheel.
• The inside of the wheel has ribs on its surface. The outside of the
wheel has a smooth surface.
Smooth Surface
25
INSIDE
OF WHEEL
OUTSIDE
OF WHEEL
Ribs
• Fit a round bushing, barrel side first, into the hole in the inside of a
wheel (ribbed side).
• Fit a hex bushing, barrel side first, into the hole in the outside of a
wheel (smooth side).
• Repeat this procedure to insert a round bushing and hex bushing
into the remaining wheel.
Round
Bushing
Inside
of Wheel
Outside
of Wheel
Hex
Bushing
• Fit the wheel (with a round bushing and hex bushing inserted) onto
the end of the front axle. Make sure the outside of the wheel (smooth
side) faces out.
• Fit a hubcap to the outside of the wheel. Make sure the peg on the
hubcap fits into the small hole in the outside of the wheel.
Outside of Wheel
Hubcap
Front
Axle
Peg
Small Hole
27
Front
Axle
Assembly
Tool with Lock
Washer Inside
• Turn the vehicle on its side.
• Fit the lock washer, rounded side up, into the assembly tool. Make
sure it fits completely inside the assembly tool.
• Fit the assembly tool (with lock washer in it) onto the end of the
front axle.
• Tap the assembly tool with a hammer to secure the lock washer on
the end of the front axle.
• Pull the wheel up to be sure it is secure on the front axle.
Assembly Tool
28
Barrel Side
Barrel Side
Barrel Side
Barrel Side
Lock Washer
Rounded Side UP