Filter
Top Products
®
Charger Connector
2
8
BATTERY CHARGING
M3864pr-0920
Battery Connector
• Squeeze the connector tabs on the charger connector and plug it into
the battery connector.
IMPORTANT! If you are recharging your battery, you will first need to
lift the hood and remove the battery retainer (pretend engine cover).
Disconnect the battery connector from the motor harness connector.
1
• Plug the charger into a standard wall outlet.
Note:
Use the charger only in a wall outlet. Do not plug the charger into
a ceiling outlet. If power flow to the wall outlet is controlled by a switch,
make sure
the switch is ON.
The power indicator on the charger does not
indicate the charge status of your battery. The power indicator allows you
to see that there is power from the wall outlet.
•
Before first-time use, charge the battery for at least 18 hours.
Never charge the battery longer than 30 hours.
• Recharge the battery for at least 14 hours after each use of your
vehicle. Do not charge the battery longer than 30 hours.
• Once the battery is charged, disconnect the charger connector from
the battery connector. Unplug the charger from the wall outlet. The
battery is now ready to be installed in your vehicle. Please see the
Battery Installation section on page 16 for detailed instructions on
installing your battery.
®