Filter
Top Products
Your child is bound for
a world of adventure!
READY
LIGHT
POWER
BUTTON
Battery Installation
Train Engine
• Locate the battery compartment on the back of
the train engine.
• Loosen the screws in the battery compartment
door with a Phillips screwdriver. Lift the battery
compartment door and insert three “AAA”
(LR03) alkaline batteries.
• Close the battery compartment door and tighten
the screws with a Phillips screwdriver. Do not
over-tighten.
• Do not mix old and new batteries or
batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable
(nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods
of non-use. Always remove exhausted
batteries from the toy. Dispose of batteries
safely. Do not dispose of product in a fire.
The batteries inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the
toy before charging.
• If removable, rechargeable batteries are
used, they are only to be charged under
adult supervision.
Battery
Information
Remote Controller
•
Locate the battery compartment on the side
of the remote controller.
• Loosen the screw in the battery compartment
door with a Phillips screwdriver. Remove the
battery compartment door and insert three
“AAA” (LR03) alkaline batteries.
• Replace the battery compartment door and
tighten the screw with a Phillips screwdriver.
Do not over-tighten.
1.5V x 6
“AAA” (LR03)
Battery Safety Information
In exceptional circumstances, batteries
may leak fluids that can cause a chemical burn
injury or ruin your toy. To avoid battery leakage:
Your child is bound for
a world of adventure!
SHOWN ACTUAL SIZE
W
e recommend the use of alkaline batteries
for longer battery life
.
IMPORTANT!
Under normal use conditions, the batteries in the engine will require
replacement more often than the batteries in the remote controller. For additional
information, see the troubleshooting section.
All Aboard!
OFF
FORWARD
FORWARD
(With Sound Effects)
1
2
3
1
2
3
3-Position Remote Controller
To prevent entanglement,
keep hair away from wheels.
WARNING
The more you
collect, the more
fun it gets!
Multiple track packs used to create this configuration.
Each sold separately & subject to availability.
Woo-
Wooooo!
Woo-
Wooooo!
Toot!
Toot!
Toot!
Toot!
Rhhhh!
Rhhhh!
Use multiple
remote control
vehicles
at once!
Additional track sold separately and subject to availability.
•
Hook the cars together and place them
on the track. Make sure the engine is
in front.
Hint: We do not recommend using the
engine on carpets. For best performance,
use on the track provided or hard,
flat surfaces
.
• Press the power button on top of the
engine. The ready light turns on.
• Hold the remote controller with the
stick facing you. Point the remote
controller toward the engine and
push the stick forward. The engine
moves forward around the track.
• To stop the engine, pull the stick
backwards to the stop position.
Hints:
• If you do not operate the remote
controller for a few minutes, the
engine shuts off and the ready
light turns off. Press the engine
power button, and operate the
remote controller to restart.
• This toy works best if you have a
clear path between the remote
controller and the engine. Point
the remote controller at the engine.
The maximum range of the remote
controller is about 12 feet.