Filter
Top Products
11
Assembly
• Fit pegs on the rear view mirror into the holes in the dash.
• Insert two #8 x
3
/
4" screws through the bottom of the
dash and tighten.
Dash
Rear View
Mirror Pegs
Top View
• Fit the tab on the vase into the groove in the dash.
• Insert a #8 x
3
/
4" screw through the bottom of the dash
and tighten.
Groove
Vase
Tab
4
5
• Turn the vehicle upright.
• While holding the right running board tab against the
bottom of the vehicle, insert a #8 x
3
/4
"
screw through
the hole in the floor of the vehicle to secure the tab.
Tighten the screw.
• Repeat assembly steps 2 and 3 to assemble the left
running board to left bottom edge the vehicle.
Floor of
Vehicle
Body
3
Battery
Compartment
Door
Sound Box
6
• Loosen the screw in the sound box battery compartment,
and open the battery compartment.
• Insert three “AA” (LR6) alkaline batteries into the
sound box.
Hint: For longest battery life, use only alkaline batteries.
• Replace the battery compartment door and tighten
the screw.
SHOWN ACTUAL SIZE
1.5V x 3
“AA” (LR6)