Filter
Top Products
Assembly
• Turn the vehicle over so that the bottom is facing up.
• Insert two #8 x
3
/
4
" screws through the slots in the
vehicle bottom and into the seat.
• Tighten the screws with a Phillips screwdriver.
Do not over-tighten.
12
13
• Fit the motor harness into the groove in the vehicle
floorboard, as shown.
11
• Place the seat onto the vehicle floorboard, as shown.
• Insert two #8 x
3
/
4
" screws through the seat and into
the floorboard.
• Tighten the screws with a Phillips screwdriver. Do not
over-tighten.
12
Motor
Harness
Groove
Seat
Groove
Slots
76790pr-0920 5/1/02 8:30 AM Page 12