Filter
Top Products
• Slide a washer onto one of the front axles.
• Slide a hex bushing, ring side first, onto the same
front axle.
• Slide a front wheel onto the front axle.
• Slide a front hubcap onto the front axle.
• Slide a hex bushing onto the front axle.
• Fit a cap nut on the end of the front axle.
• Fit the cupped end of the cap nut assemby tool over
the cap nut and tap the end of the cap nut assembly
tool with a hammer to secure the cap nut on the end of
the axle.
• Repeat this procedure to assemble the remaining front
wheel to the other front axle.
5
Front Wheel
Hex
Bushing
Washer
Front
Hubcap
Hex Bushing
Cap Nut
Assembly
Tool
Cap Nut
10
Assembly
4
Washer
Rear
Wheel Driver
Hex
Bushing
Cap Nut
Cap Nut
Assembly Tool
Rear
Hubcap
• Slide a washer onto the rear axle.
• Slide the rear wheel driver onto the rear axle. Make
sure the rear wheel driver fits onto the pins on the
motor assembly.
• Slide a rear wheel onto the rear axle. Make sure the
ribs on the wheel fit into the grooves on the rear
wheel driver.
• Slide a rear hubcap onto the rear axle.
• Slide a hex bushing, barrel side first, onto the rear axle.
Press all but the ring on the hex bushing into the wheel.
• Fit a cap nut on the end of the rear axle.
• Fit the cupped end of the cap nut assembly tool over
the cap nut and tap the end of the cap nut assembly
tool with a hammer to secure the cap nut on the end of
the rear axle.