Filter
Top Products
IMPORTANT
A 25 AMP FUSE MUST
BE INSTALLED IN TOP
OF BATTERY BEFORE
TOY WILL RECHARGE
OR OPERATE
• Insert a Power Wheels
®
25 amp fuse into the battery.
Note: The top of the fuse will not be flush with the top of the
battery when properly installed.
IMPORTANT! The battery must be removed from your vehicle for the initial charge in order to complete assembly.
After assembly is complete, you do not need to remove the battery from your vehicle to recharge it.
• Plug the battery connector into the charger connector.
Battery
Connector
Charger
Connector
25 Amp Fuse
Battery Charging
3
• Locate the lock fastener in the back end of the seat.
• Using a slotted screwdriver, turn the lock fastener
1
/4 turn
to the unlocked position .
• Lift the seat from the vehicle body.
Lock
Fastener
Seat
1
• Loosen the screw in the battery clamp and remove it.
• Lift the battery clamp and remove the battery from the
battery compartment.
2
4
7
Battery
Compartment
Battery
Battery
Clamp
Locked
Unlocked
Little Kawa 9/20/02 1:36 PM Page 7