19
IMPORTANT! Use only a Power Wheels
®
6 volt battery
with A-style connector and built-in thermal fuse. Use of
any other battery will damage your vehicle. Make sure that
you charge the battery for at least 18 hours using the
enclosed Power Wheels
®
Super 6
™
volt charger before
operating your vehicle for the first time. Charge the
battery for at least 14 hours after each use of the vehicle.
Never charge the battery longer than 30 hours. Failure to
follow these instructions may damage your battery and will
void your warranty.
• Using a slotted screwdriver, turn each lock fastener
1
/
4
turn to the unlocked position.
• Lift the hood to access the battery compartment.
• Slide the battery clamp open.
• Place the battery in the battery compartment and
release the battery clamp.
•Lower the hood on the vehicle. Using a slotted screwdriver,
turn each lock fastener
1
/
4
turn to the locked position.
IMPORTANT! Remember to keep the lock fasteners
locked at all times to prevent children from accessing
the battery compartment.
Hood
Hood
Power Wheels
®
6 Volt Battery
Battery Installation
Slide
Battery
Clamp
Battery
Connector
Motor
Harness
Connector
H
1
2
3
Locked
Unlocked
Locked
Unlocked
• Plug the battery connector into the motor harness
connector.
Note: If the battery connector will not plug into the motor
harness connector, turn it over and try again! Do not force
the battery connector into the motor harness connector.
Correct
Incorrect
GAP
NO GAP
4