Edelbrock R09431 Automobile Parts User Manual


 
©2006 Edelbrock Corporation
Rev. 3/06 - BC/mc
Catalog #R09430, #R09431
Brochure #63-0490
Page 2 of 2
A Division of Edelbrock Corporation
2700 California Street
Torrance, CA 90503
Toll-Free Tech Line: 1-800-416-8628
Tech E-Mail: Edelbrock@Edelbrock.com
Fig. 3
3. Install banjo end of Russell lower hose (Left or Right) onto caliper so that hose runs behind caliper
(See Fig. 3)
.
Mount hose using factory routing and hardware. Insert male threaded hose end into upper hose T-block. Repeat
for other side.
4. Install banjo end of upper hose onto master cylinder.
5. Check hose clearance throughout entire steering and suspension travel range.
6. Bleed the system and check for leaks while applying pressure.