Filter
Top Products
Catalog #2166, #3766, #7166, #7566
Rev. 3/05 - RS/mc
©2005 Edelbrock Corporation
Brochure #63-0296Page 2 of 4
Manifold 2166 (Non-Emissions):
Manifold 7166, 7566 (Non-Emissions):
• THROTTLE BRACKETS: Due to the design of Performer manifolds, the throttle and kickdown bracket on some vehicles may
require modification to fit. When using Edelbrock carburetors, use #1495 or #1848 throttle plate kit. Manifolds #3766, #7166,
and #7566 are supplied with two throttle bracket spacers which may be required on some installations to align the throttle
bracket with the OEM carburetor linkage.
• GASKETS: Do not use competition-style intake gaskets for this street manifold. Due to material deterioration over time, internal
leakage of vacuum, oil, and coolant may occur.
A - Carburetor will work with non-EGR or pre-emission control systems.
B - Carburetor will work with EGR system.
H - Carburetor has provision for evaporative canister.
I - Carburetor has no provisions for evaporative canister.
K - Carburetor requires #8008 or #8024 stud, washer and nut kit. Determine proper length based on gasket thickness and your accessory
mounting requirements.
N - Carburetor accepts factory cruise control
O - Carburetor comes with manual choke. It can be converted to electric choke using kit #1478.
P - Carburetor is not a stock replacement part
CARBURETOR REFERENCE PARTS REQUIRED FOR INSTALLATION
Performer #1405 (600 cfm) A, I, K, N, O #1495 or 1848 throttle plate kit, #1483 or 1844 throttle lever adapter
Performer #1406 (600 cfm) A, I, K, N #1495 or 1848 throttle plate kit, #1483 or 1844 throttle lever adapter
Thunder Series #1805 (650 cfm) A, I, K, N #1495 or 1848 throttle plate kit, #1483 or 1844 throttle lever adapter
Thunder Series #1806 (650 cfm) A, I, K, N #1495 or 1848 throttle plate kit, #1483 or 1844 throttle lever adapter
Thunder Series #1825 (650 cfm) A, I, K, N #1495 or 1848 throttle plate kit, #1483 or 1844 throttle lever adapter
Thunder Series #1826 (650 cfm) A, I, K, N #1495 or 1848 throttle plate kit, #1483 or 1844 throttle lever adapter
Performer #1407 (750 cfm) A, I, K, N, O #1495 or 1848 throttle plate kit, #1483 or 1844 throttle lever adapter
Performer #1411 (750 cfm) A, I, K, N #1495 or 1848 throttle plate kit, #1483 or 1844 throttle lever adapter
Performer #1412 (800 cfm) A, I, K, N, O #1495 or 1848 throttle plate kit, #1483 or 1844 throttle lever adapter
Performer #1413 (800 cfm) A, I, K, N #1495 or 1848 throttle plate kit, #1483 or 1844 throttle lever adapter
Thunder Series #1812 (800 cfm) A, I, K, N #1495 or 1848 throttle plate kit, #1483 or 1844 throttle lever adapter
Thunder Series #1813 (800 cfm) A, I, K, N #1495 or 1848 throttle plate kit, #1483 or 1844 throttle lever adapter
CARBURETOR REFERENCE PARTS REQUIRED FOR INSTALLATION
Performer #1407 (750 cfm) A, I, K, N, O #1495 or 1848 throttle plate kit, #1483 or 1844 throttle lever adapter
Performer #1411 (750 cfm) A, I, K, N #1495 or 1848 throttle plate kit, #1483 or 1844 throttle lever adapter
Performer #1412 (800 cfm) A, I, K, N, O #1495 or 1848 throttle plate kit, #1483 or 1844 throttle lever adapter
Performer #1413 (800 cfm) A, I, K, N #1495 or 1848 throttle plate kit, #1483 or 1844 throttle lever adapter
Thunder Series #1812 (800 cfm) A, I, K, N #1495 or 1848 throttle plate kit, #1483 or 1844 throttle lever adapter
Thunder Series #1813 (800 cfm) A, I, K, N #1495 or 1848 throttle plate kit, #1483 or 1844 throttle lever adapter
INTAKE MANIFOLD REFERENCE RECOMMENDED GASKET
2166, 3766, 7166, 7566 Edelbrock #7223 Port: 1.98” x 2.26”, .060” Thickness
NOTE: To ensure maximum performance and a proper seal, Edelbrock gaskets which
are specifically designed and manufactured for use with Edelbrock parts must be used.