Filter
Top Products
Catalog #2186, 2191, 7186, 7193
Rev. 3/05 - RS/mc
©2005 Edelbrock Corporation
Brochure #63-0118Page 2 of 3
• CARBURETOR RECOMMENDATIONS:
Manifold 2186, 2191 (Emissions Controlled Applications):
Manifold 2186, 2191 (Non-Emissions):
Manifold 7186, 7193 (Non-Emissions):
• THROTTLE BRACKETS: Due to the design of Performer manifolds, the throttle and kickdown bracket on some vehicles may require
modification to fit.
• GASKETS: Do not use competition style intake gaskets for this street manifold. Due to material deterioration over time, internal leakage of
vacuum, oil, and coolant may occur.
A - Carburetor will work with non-EGR or pre-emission control systems.
B - Carburetor will work with EGRsystem.
C - Carburetor has provision for evaporative canister.
D - Carburetor has no provisions for evaporative canister.
E - Carburetor requires #8008 or #8024 stud, washer and nut kit. Determine proper length based on gasket thickness and your accessory
mounting requirements.
F - Carburetor accepts factory cruise control
G - Carburetor comes with manual choke. It can be converted to electric choke using kit #1478.
CARBURETOR REFERENCE PARTS REQUIRED FOR INSTALLATION
Performer #1407 (750 cfm) A, D, E, F, G #1481 or 1843 Chrysler throttle lever adapter
Performer #1411 (750 cfm) A, D, E, F #1481 or 1843 Chrysler throttle lever adapter
Performer #1412 (800 cfm) A, D, E, F, G #1481 or 1843 Chrysler throttle lever adapter
Performer #1413 (800 cfm) A, D, E, F #1481 or 1843 Chrysler throttle lever adapter
Thunder Series #1812 (800 cfm) A, D, E, F #1481 or 1843 Chrysler throttle lever adapter
Thunder Series #1813 (800 cfm) A, D, E, F #1481 or 1843 Chrysler throttle lever adapter
CARBURETOR REFERENCE PARTS REQUIRED FOR INSTALLATION
Thunder Series #1805 (650 cfm) A, D, E, F #1481 or 1843 Chrysler throttle lever adapter
Thunder Series #1806 (650 cfm) A, D, E, F #1481 or 1843 Chrysler throttle lever adapter
Thunder Series #1825 (650 cfm) A, D, E, F #1481 or 1843 Chrysler throttle lever adapter
Thunder Series #1826 (650 cfm) A, D, E, F #1481 or 1843 Chrysler throttle lever adapter
Performer #1407 (750 cfm) A, D, E, F, G #1481 or 1843 Chrysler throttle lever adapter
Performer #1411 (750 cfm) A, D, E, F #1481 or 1843 Chrysler throttle lever adapter
Performer #1412 (800 cfm) A, D, E, F, G #1481 or 1843 Chrysler throttle lever adapter
Performer #1413 (800 cfm) A, D, E, F #1481 or 1843 Chrysler throttle lever adapter
Thunder Series #1812 (800 cfm) A, D, E, F #1481 or 1843 Chrysler throttle lever adapter
Thunder Series #1813 (800 cfm) A, D, E, F #1481 or 1843 Chrysler throttle lever adapter
INTAKE MANIFOLD REFERENCE RECOMMENDED GASKET
2186, 2191, 7186, 7193 A Edelbrock #7225 Port: 1.23” x 2.27”, .030” Thickness
NOTE: To ensure maximum performance and a proper seal, Edelbrock gaskets which are
specifically designed and manufactured for use with Edelbrock parts must be used.
A - Must be used with OEM style valley pan.
CARBURETOR REFERENCE PARTS REQUIRED FOR INSTALLATION
OEM 4BBL B, C, F