Filter
Top Products
CAMSHAFT: Performer RPM Hydraulic
CATALOG #7106
ENGINE: Ford 352-428 c.i.d. V8
(1963-1/2 and later)
RPM RANGE: 1500-6500
CAUTION: Do not use dual valve springs.Use only recom-
mended Edelbrock Sure Seat Valve Springs #5767. Use stock
ratio rocker arms only (1.76:1).
Duration at .006" Lift: Intake 296° Exhaust 296°
Duration at .050" Lift: Intake 236° Exhaust 236°
Lift at cam: Intake .325" Exhaust .325"
Lift at valve: Intake .572" Exhaust .572"
Timing at .050 Lift:
Open Close
Intake 15° BTDC 41° ABDC
Exhaust 51° BBDC 5° ATDC
Centerlines
: Lobe Separation: 108°
Intake Centerline: 103°
• CAUTION: Use Edelbrock Performer RPM Timing Chain
and Gear Set #7808. Do not use late model timing chain and
gear sets that are designed for emission-controlled engines.
These timing sets are machined in a retarded position and
are not recommended for this camshaft installation.
Edelbrock Timing Sets feature three keyways for specified
timing selection. Use “0” position for most applications.
CAMSHAFT: Performer RPM Hydraulic
CATALOG #7106
ENGINE: Ford 352-428 c.i.d. V8
(1963-1/2 and later)
RPM RANGE: 1500-6500
CAUTION: Do not use dual valve springs.Use only recom-
mended Edelbrock Sure Seat Valve Springs #5767. Use stock
ratio rocker arms only (1.76:1).
Duration at .006" Lift: Intake 296° Exhaust 296°
Duration at .050" Lift: Intake 236° Exhaust 236°
Lift at cam: Intake .325" Exhaust .325"
Lift at valve: Intake .572" Exhaust .572"
Timing at .050 Lift:
Open Close
Intake 15° BTDC 41° ABDC
Exhaust 51° BBDC 5° ATDC
Centerlines
: Lobe Separation: 108°
Intake Centerline: 103°
• CAUTION: Use Edelbrock Performer RPM Timing Chain
and Gear Set #7808. Do not use late model timing chain and
gear sets that are designed for emission-controlled engines.
These timing sets are machined in a retarded position and
are not recommended for this camshaft installation.
Edelbrock Timing Sets feature three keyways for specified
timing selection. Use “0” position for most applications.
CAMSHAFT: Performer RPM Hydraulic
CATALOG #7106
ENGINE: Ford 352-428 c.i.d. V8
(1963-1/2 and later)
RPM RANGE: 1500-6500
CAUTION: Do not use dual valve springs.Use only recom-
mended Edelbrock Sure Seat Valve Springs #5767. Use stock
ratio rocker arms only (1.76:1).
Duration at .006" Lift: Intake 296° Exhaust 296°
Duration at .050" Lift: Intake 236° Exhaust 236°
Lift at cam: Intake .325" Exhaust .325"
Lift at valve: Intake .572" Exhaust .572"
Timing at .050 Lift:
Open Close
Intake 15° BTDC 41° ABDC
Exhaust 51° BBDC 5° ATDC
Centerlines
: Lobe Separation: 108°
Intake Centerline: 103°
• CAUTION: Use Edelbrock Performer RPM Timing Chain
and Gear Set #7808. Do not use late model timing chain and
gear sets that are designed for emission-controlled engines.
These timing sets are machined in a retarded position and
are not recommended for this camshaft installation.
Edelbrock Timing Sets feature three keyways for specified
timing selection. Use “0” position for most applications.
CAMSHAFT: Performer RPM Hydraulic
CATALOG #7106
ENGINE: Ford 352-428 c.i.d. V8
(1963-1/2 and later)
RPM RANGE: 1500-6500
CAUTION: Do not use dual valve springs.Use only recom-
mended Edelbrock Sure Seat Valve Springs #5767. Use stock
ratio rocker arms only (1.76:1).
Duration at .006" Lift: Intake 296° Exhaust 296°
Duration at .050" Lift: Intake 236° Exhaust 236°
Lift at cam: Intake .325" Exhaust .325"
Lift at valve: Intake .572" Exhaust .572"
Timing at .050 Lift:
Open Close
Intake 15° BTDC 41° ABDC
Exhaust 51° BBDC 5° ATDC
Centerlines
: Lobe Separation: 108°
Intake Centerline: 103°
• CAUTION: Use Edelbrock Performer RPM Timing Chain
and Gear Set #7808. Do not use late model timing chain and
gear sets that are designed for emission-controlled engines.
These timing sets are machined in a retarded position and
are not recommended for this camshaft installation.
Edelbrock Timing Sets feature three keyways for specified
timing selection. Use “0” position for most applications.