Edelbrock 66013 Automobile Parts User Manual


  Open as PDF
of 3
 
Catalog #66012 & #66013
©2006 Edelbrock Corporation
Page 3 of 3
Brochure #63-66012
Rev. 5/06 - DA/mc
KIT CONTENTS
Catalog #66012 & #66013
Qty. Description Qty. Description
❑ 1 Manifold left side (#25-9309) (#66012) ❑ 1 EGR gasket
❑ 1 Manifold right side (#25-9310) (#66012) ❑ 2 Donut gaskets; 2-1/4”
❑ 1 Manifold left side (#25-9080) (#66013)
❑ 4 Hex capscrews; 3/8” x 2”
❑ 1 Manifold right side (#25-9081) (#66013)
❑ 2 Hex nuts; 5/16”-18
❑ 1 Extention pipe - left (#25-9594) ❑ 2 Hex bolts; 5/16”-18 x 1-1/4”
❑ 1 Extension pipe - right (#25-9595) ❑ 4 Lock washers; 3/8”
❑ 12 Hex header bolts; 5/16” - 18” x 1” ❑ 14 Lock washers; 5/16”
❑ 2 Chrysler V8 port gaskets ❑ 8 Flat washers; 5/16”
❑ 1 EGR block-off plate #79-8051 (for 1996 only)
Edelbrock Corporation
2700 California St.
Torrance, CA 90503
Tech Line: 1-800-416-8628
E-Mail: edelbrock@edelbrock.com
Figure 1
Side view of catalytic converter
Figure 2
Side view of converter/headpipe connection
Oxygen Sensor Location
Cut 1/2” in front of weld
Donut Gasket
Make sure the spacing is
equal all the way to
ground connection
 previous