Filter
Top Products
35
Basic
operation
Setting POS (position selector)
The stereophonic position for obtaining optimum acoustic effects can be adjusted to match
the number and position of passengers.
In addition, front-to-back, right-to-left volume balance can be adjusted for the selected
position.
Touching the image of a seat
shown on the POS setting screen
will change the position.
• The selected position will change its
color to orange. Touching the seat
again will cancel the selection. The
four positions shown by the table
below can be set.
• Touching will cancel all
settings.
• Touch after changing settings. The position will be saved and the system
will return to the previous operation screen.
Touch switch Function Touch switch Function
Acoustics optimized for
driver's seat
Acoustics optimized for
both front seats
Acoustics optimized for
passenger's seat
Acoustics optimized for
rear seats
OFF
BACK
•This setting cannot be done at the same time as adjustment of the volume
balance (see next page) and the Circle Surround II (page 43).
•The default settings of the main unit are configured for left-hand drive vehicles.