Eclipse - Fujitsu Ten AVN8826 GPS Receiver User Manual


 
English English English English English English English
-
4
-
Never cut the insulation on the power cable or use it to power any other equipment. If the rated current capacity of
the power cable is exceeded, fire and electric shocks may result.
The cables should be secured with tape or a similar securing method to prevent any obstructions while driving. If
they get wound or entangled around components such as the steering wheel, shifting lever, or brake pedal,
accidents may result.
If removing the end of the cord to connect to another cord, be sure to wrap PVC tape or a similar wire insulating
method around the connection to insulate it. If the connection is not insulated, fire or accidents may result.
Refer to page 5 for details on the wire colours and connection points for interconnecting cables , and and
.
4
32
Tip
8
1
2
3
4
20P
GPS ANTENNA
14
1P
5
7
6
B
E
ANTENNA PLUG
MAIN UNIT
16P
1
INTERCONNECTING CABLE (E-lan etc)
4
INTERCONNECTING CABLE
(Speed pulse, parking, reverse,video, etc)
3
INTERCONNECTING
CABLE
(Power and speaker
connector)
2
A
8
D
C
F
16P
ANTENNA CABLE
5
4P
Tip*1
The positions of the B+ and ACC pins on the connector may
vary depending on the vehicle. In such cases, replace the end
of the connector. Ask your dealer for details on connector pin
positions.
Tip*1
TO VEHICLE-SIDE
CONNECTOR
Names and functions of ter
Names and functions of ter
minals
minals
13P
Installation is not possible for vehicles without ACC.