Filter
Top Products
information on ALR, refer to “Automatic Locking Mode”
in this section. The following chart defines the seating
positions with this feature.
Left Center Right
First Row CRS Lock
Second Row CRS Lock CRS Lock
—If
Equipped
CRS Lock
If the passenger seating position is equipped with an
ALR the proper fastening procedure is as follows:
1. For Child Restraint System (CRS): Pull the seat belt all
the way out, then latch the buckle and allow the excess
webbing to retract. As the belt retracts, you will hear a
clicking sound. This indicates the safety belt is now in the
Automatic Locking mode. This will secure the child
restraint tightly and properly.
2. For regular occupants: Only pull the belt webbing out
far enough to comfortably wrap around the occupants
mid-section. If the belt is pulled fully out, allow the belt
to fully retract. As the belt retracts, you will hear a
clicking sound. Then, carefully pull out only the amount
of webbing necessary to latch the buckle.
WARNING!
•
It is dangerous to ride in a cargo area, inside or
outside of a vehicle. In an accident, people riding
in these areas are more likely to be seriously
injured or killed.
•
Do not allow people to ride in any area of your
vehicle that is not equipped with seats and seat
belts.
•
Be sure everyone in your vehicle is in a seat and
using a seat belt properly.
(Continued)
2
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37