Filter
Top Products
17. Release the parking brake.
NOTE:
•
The transfer case cannot be shifted into NEUTRAL
from the 4WD AUTO (if equipped) position.
•
Steps 1 through 5 are requirements that must be met
prior to pressing the NEUTRAL button, and must
continue to be met until the four seconds elapses and
the shift has been completed. If any of these require-
ments are not met prior to pressing the NEUTRAL
button or are no longer met during the four second
timer, then the NEUTRAL indicator light will flash
continuously until all requirements are met or until the
NEUTRAL button is released.
•
The ignition switch must be in the ON position for a
shift to take place and for the position indicator lights
to be operable. If the ignition switch is not in the ON
position, the shift will not take place and no position
indicator lights will be on or flashing.
•
The flashing NEUTRAL indicator light indicates that
shift requirements have not been met.
Returning to Normal Operation – Electronic Shift
Transfer Case
Use the following procedure to prepare your vehicle for
normal usage:
1. Bring the vehicle to a complete stop, leaving it con-
nected to the tow vehicle.
2. Firmly apply the parking brake.
3. Insert the key fob into the ignition switch and turn it to
the ON position, but do not start the engine.
4. Press and hold the brake pedal.
5. Shift the transmission into NEUTRAL.
6. Press and hold the transfer case switch NEUTRAL
button for one second.
468 STARTING AND OPERATING