Dodge 2009 Avenger Automobile User Manual


 
NOTE: In Autostick mode, the transaxle will only shift
up or down when the driver moves the shift lever to the
Right (+) or Left (-).
AutoStick is deactivated when the shift lever is shifted
from the AutoStick (+/-) position into the DRIVE
position.
General Information
You can start out in first or second gear. The system
will ignore attempts to upshift at too low of a vehicle
speed.
If a ratio other than 1st is selected, and the vehicle is
brought to a stop, the transaxle control logic will
automatically select the 1st gear ratio.
Starting out in second gear is helpful in snowy or icy
conditions.
Avoid using speed control when Autostick is en-
gaged.
The transaxle will automatically shift up when maxi-
mum engine speed is reached while Autostick is
engaged.
Transaxle shifting will be more noticeable when
Autostick is engaged.
If a downshift would cause the engine to over-speed,
that shift will not occur until it is safe for the engine.
Mostly the transaxle will stay in the manually selected
ratio, however.
If the system detects powertrain overheating, the
transaxle will revert to the automatic shift mode and
remain in that mode until the powertrain cools off.
If the system detects a problem, it will disable the
AutoStick mode and the transaxle will return to the
automatic mode until the problem is corrected.
STARTING AND OPERATING 277
5