Filter
Top Products
To reset the display shown, turn the ignition switch to the
ON position, then press and hold the reset button for
approximately two seconds.
When the appropriate conditions exist, the following
odometer messages will display:
NE .......Eight-point compass headings are displayed
(N, S, E, W, NE, NW, SE, SW)
14°F............Temperature (Fahrenheit or Celsius)
AV G .........AverageFuel Economy (U.S. or Metric)
DTE .......................Distance to Empty
ET ............................Elapsed Time
P..........................ParkAssist On/Off
Should this wrench symbol display with the
letter P next to it, your Park Assist System
needs servicing. Contact your authorized
dealer.
NOTE: Temperature and Average Fuel Economy can be
changed from U.S. or Metric by pressing and holding the
left CMTC Reset Button located on the instrument cluster
near the temperature gauge.
Compass Mini-Trip Computer (CMTC) Trip
Odometer (ODO)
This display shows the distance traveled since the last
reset. Press and release the right button located on the
instrument cluster to switch from odometer, to trip A or
trip B. Press and hold the right button while the
odometer/trip odometer is displayed to reset.
Trip A
Shows the total distance traveled for Trip A since the last
reset.
Trip B
Shows the total distance traveled for Trip B since the last
reset.
UNDERSTANDING YOUR INSTRUMENT PANEL 239
4