Dodge 2007 ND Dakota Automobile User Manual


 
Auto Unlock Feature
This feature unlocks all the doors of the vehicle when any
door is opened. The following must be met:
The doors of the vehicle must be locked automatically
by the Automatic Door Lock feature.
The vehicle is in P (Park) and the ignition switch is in
any key position.
This feature will not operate if any manual operation of a
door lock switch has occurred
NOTE: This customer programmable feature is enabled
when your vehicle is shipped from the assembly plant.
Auto Unlock Feature Programming
Customer Programming sequence to disable or enable:
1. Enter your vehicle and close all doors.
2. Fasten your seat belt (fastening the seat belt will cancel
any chiming that may be confusing during this program-
ming procedure).
3. Insert the key into the ignition.
4. Within 15 seconds, cycle the key from the OFF position
to the ON position a minimum of four times; ending in
the ON position (do not start the engine)
5. Within 30 seconds, press the driver’s door lock switch
in the UNLOCK direction.
6. A single chime will sound to indicate the feature has
been changed.
7. To reactivate the feature, repeat the above steps.
8. If a chime is not heard, program mode was canceled
before the feature could be changed. If necessary repeat
the above procedure.
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE